Installation, Continued, Stove cavity assembly – Desa SVYD18PRA User Manual

Page 9

Advertising
background image

www.desatech.com

113084-01E

9

6"

Minimum

48"

Minimum

Ceiling

Floor

Back

Wall

INSTALLATION

Continued

Figure 4 - Minimum Clearance to Walls

and Ceiling (Stove May Vary Depending

on Model)

Top View

Side
View

12"

Minimum

12"

Minimum

48"

Minimum

Ceiling

Side

Wall

Side

Wall

Back Wall

Side Wall

Side Wall

12 "

Minimum

12 "

Minimum

6 "

Minimum

Corner

Wall

Wall

6 "

Minimum

6 "

Minimum

Front of
Stove Unit

Front

View

STOVE cAVITY ASSEMBLY

1. Lift off corrugated box enclosing stove

body crating.

2. Remove all screws fastening the wood frame

enclosure. Spread wood frame open and lift

away from plastic-bagged stove body. The

bottom pieces of pallet wood will remain

bolted to the stove body.

3. Remove plastic bag from stove body.

4. Remove all contents from inside stove cavity.

Contents include:

(4) - Legs (include leg leveler bolts)

(1) - Bottom door

(3) - Top grates

(1) - Hardware kit bag with fasteners

5. Carefully lay stove body on back to attach bot-

tom components to stove body (see Figure 5).

Rest stove on drop cloth or blanket to avoid

scratching stove edges.

6. Remove remaining pallet wood attached to bot-

tom of stove body (see Figure 6). Use an adjust-

able wrench or 12 mm socket to remove bolts.

7. Fasten each leg to stove with four (4) M8 x

1.25 - 20 mm bolts. Use a flat washer and

lock washer with each bolt. Tighten bolts into

threaded holes on stove body (see Figures 7

and 8, page 10). Use an adjustable wrench or

a 12 mm socket.

8. Attach stove door by inserting step bolt through

door hinge pivot hole and into threaded hole in

stove body (see Figure 7 and Figure 10, page

10). Use an adjustable wrench or a 12 mm

socket to fasten step bolt. Tighten step bolt

until snug. Make sure door moves freely.

Figure 5 - Laying Down Stove On Side

(Stove Style May Vary Depending on

Model)

Front of
Stove
Unit

Drop
Cloth/
Blanket

Pallet Wood Bolted to
Stove Body Bottom

Top of
Stove Unit

Front of
Stove Unit

Top of
Stove
Unit

Figure 6 - Removing Pallet Wood From

The Bottom of The Stove

Pallet Wood

Bolt

Pallet
Wood

Bottom
Of Stove
Unit

Front

Front of
Stove Unit

Advertising
This manual is related to the following products: