Directed Electronics VIPER 5701 - Manual (Page 53)

© 2008 Directed Electronics—all rights reserved 
Quick Reference Guide
Arming
To arm, press
1
3
4
5
6
2
A U X
. When the system arms, the LOCK LED blinks for
one second, with 1 beep and siren tone.
Arming while driving
To arm the system while driving, press
1
3
4
5
6
2
A U X
on your remote while
the vehicle is running. The LOCK LED blinks for one second.
Disarming
To disarm, press
1
3
4
5
6
2
A U X
. The UNLOCK LED blinks for one second, and
you will hear 2 beeps.
Disarming without a remote
Turn on the ignition. Press the Valet button within 15 seconds.
The system should now disarm. If it does not, you may have
waited too long or pressed the button incorrect number of times.
Refer to reverse side for Valet pushes and try again.
Number of Valet button pulses for disarming_______________
Silent Arm
Press one time and then press
1
3
4
5
6
2
A U X
. Arm LED will blink for one
second with no sound.
Silent Disarm
Press one time and then press
1
3
4
5
6
2
A U X
. Disarm LED will blink for 1
second with no sound.
▀
▀
▀
▀
▀
▀
Cut along dotted line and f
old f
or a quick and eas
y r
efer
ence to k
eep in pur
se or w
allet
.
✂
✂