Dacor AERB30G06 - Manual

STEP 1: Disconnect the power cord to the range. Turn off the gas at the gas supply
valve.
STEP 2: Slide the range out from the cabinet.
STEP 3: Remove the grates.
STEP 4: Remove and retain the three (3) screws on the front of the existing backguard.
STEP 5: Remove the two (2) top screws on the back of the side panels.
STEP 6: Remove the existing backguard.
Continued on back...
DANGER:
Electric shock and explosion hazard! Before installation,
disconnect the power cord and shut off the gas supply
valve.
Instructions:
Backguard Kits
AERB30G03, AERB30G06, AERB30G09
INSTALLATION
INSTRUCTIONS
RANGE MODEL: ER30G
Part No. 106191 Rev. B
WARNING: Do not disassemble the range until it has cooled.
Backguard Removal
Backguard height varies with kit