Dual XML8150 - Manual (Page 19)

19
XML8150 OPERATION
To play MP3/WMA/AAC files from most mass storage
devices,connect a device to the XML8150's USB port.
To play MP3/WMA/AAC files from an SD Card, insert an SD
card into the XML8150's SD card slot, located behind the
front panel. Insert the SD card with the label facing to the
left, and press the card until it clicks into place. Remove the
SD card by pressing in until it clicks, then pull to remove.
When a USB or SD card device is first connected, playback
will begin momentarily. Depending on the number of files
and folders, it may take several seconds for the device to
begin playing. If no valid MP3/WMA files are detected, “NO
FILE” will be displayed and the last mode will be resumed.
Press TRACK
ll
to skip to the beginning of the next
track. Press TRACK
nn
to return to the beginning of the
current track. Pressing TRACK
nn
again skips to the
beginning of the previous track.
Press and hold TRACK
ll
or TRACK
nn
to fast forward
or reverse a track.
Press
l
/ II to temporarily stop USB playback.
Press
l
/ II again to resume playback.
Press SELECT to enter the USB file/folder search mode. An
alphabetical list of files and folders in the current folder from
the USB/SD card device will be displayed.
• Turn the volume knob to cycle through the list of files and
folders.
• Press SELECT to change to the selected folder or play the
selected file.
• Press ESC to change to the previous folder or to exit the
search menu (from the "ROOT" folder).
The icon will illuminate when a folder name is
currently being displayed.
The icon will illuminate when a file name is currently
being displayed.
Note: Files not located in a folder will appear in the "ROOT" folder.
Connecting a USB Device
(sold separately)
Connecting a SD Card
(sold separately)
Playing Music
Track Select
Fast Forward and Reverse
Pause
Begin Searching
Search menu controls
File and Folder names
USB/SD Card Operation
File and Folder Search