Audio menu, Xml8150 operation – Dual XML8150 User Manual

Page 8

Advertising
background image

8

XML8150

 OPERATION

Press AUDIO/MENU until BASS appears, then rotate the

volume knob left/right to adjust (-6 minimum / +6 maximum).

Press AUDIO/MENU until MIDDLE appears, then rotate the

volume knob left/right to adjust (-6 minimum / +6 maximum).

Press AUDIO/MENU until TREBLE appears, then rotate the

volume knob left/right to adjust (-6 minimum / +6 maximum).

Note: Bass, Middle and Treble settings are retained for each

mode individually.

Press AUDIO/MENU until BALANCE appears, then rotate

the volume knob left/right to adjust (BALANCE LEFT 12 to

BALANCE RIGHT 12). "BALANCE EVEN" represents equal

balance.

Press AUDIO/MENU until FADER appears, then rotate the

volume knob left/right to adjust (FADER FRONT 12 to FADER

REAR 12). "FADER EVEN" represents equal fader.

Press AUDIO/MENU until EQ appears. Rotate the volume 

knob left/right to select between FLAT (default), POP, JAZZ,

CLASSIC, BEAT, ROCK and USER equalization curves. Press

SELECT to confirm. Any manual adjustment to the Bass,

Middle or Treble settings are automatically saved as USER.

Press AUDIO/MENU until SUBWFR appears, then press

SELECT to confirm. Rotate the volume knob left/right to adjust

(0-12). Adjusting the level to 0 turns the subwoofer off.

The source volume level control allows a gain adjustment

for each audio source. Set the source volume level for each

mode, depending on the relative volume of each audio source.

To set the source volume level, press AUDIO/MENU until

"SOURCE LEVEL" appears. After one second, the current

mode will appear on the display. Turn the volume knob to

adjust the audio level of the current source (-6 minimum/+6

maximum).

Note: Only the current mode will be available for adjustment.

Change to another mode to set the source level for that mode.

Bass

Middle

Treble

Balance

Fader

                  

EQ

Subwoofer

Source Volume Level

Audio Menu

Press AUDIO/MENU momentarily to cycle between Bass, Treble, Balance, Fader,

Equalizer, Subwoofer, High Pass Filter and Source Volume Level. Press ESC at any time

to exit the audio menu.

BASS MIDDLE TREBLE BALANCE FADER EQ SUBWOOFER SOURCE LEVEL

Advertising