Dual XML8150 - Manual (Page 6)

6
XML8150 OPERATION
Power On/Off
Mode
Steering Wheel Interface
Input
Auxiliary Input
Volume
Mute
Reset
Display
Set the Clock
12/24-Hour Clock
Setup Menu
General Operation
Press or any other button to turn unit on. Press and hold
to turn unit off.
Press MODE to select between AM/FM, auxiliary input,
operation of iPod, USB, SD and Bluetooth modes. Modes of
operation are indicated in the display.
Note: Operation of iPod mode will not appear unless an iPod
device has been connected. USB and SD modes will not
appear unless a USB device has been connected or SD card
has been inserted.
Note: iPod and iPhone devices may be connected to the fold-
out dock or directly to the USB port on the XML8150.
The steering wheel interface input located on the back of the
head unit allows connection to the PAC (Pacific Accessory
Corporation) SWI-PS interface module (sold separately). Visit
www.pac-audio.com for details.
To configure steering wheel controls, follow the instructions
provided with the PAC SWI-PS interface module. After
installing the interface module, insert the module's 3.5mm
jack into the port on the back of the head unit.
Insert 3.5 mm plug to connect your portable audio device.
Adjust volume using volume knob (00-46).
Press to silence the audio. “MUTE” will flash in the
display. Press again to cancel.
Press the RESET button, located on the front panel, to reset
the unit back to the factory settings if abnormal operation
occurs.
Press DISP to toggle between items such as clock, radio
frequency, or ID3 tag song information.
With the unit on, press and hold DISP until the clock begins
to flash, then release. Press TUNE
nn
to adjust the
hours and TUNE
ll
to adjust the minutes. Press DISP
momentarily to save the selected time.
The clock will display 12-hour AM/PM time in USA frequency
spacing mode (PM 10:00). In European frequency spacing
mode, the clock will display 24-hour time (22:00).
Note: 24-hour time and European frequency spacing are not
available if the HDM90 HD Radio™ tuner are connected.
Press and hold AUDIO/MENU for more than 3 seconds to
access the setup menu, then press AUDIO/MENU to cycle
through menu options. When desired option appears in the
display, rotate the volume knob left/right to adjust or activate
desired function. Press ESC to exit any menu or submenu.