Danby DWC516BLS - Manual (Page 12)

Before You Call For Service
If none of the above rectify the situation please contact our customer service depart-
ment at
1-800-26- (1-800-263-2629).
11
Trouble Shooting
Problem Possible Cause What to do
No Power. A fuse in your home may Replace fuse or reset circuit breaker.
be blown or the circuit
breaker tripped
Power surge Unplug the wine cooler, wait a few
seconds and then plug it back in.
Plug not fully inserted into Make sure the 3-prong plug on the
wall outlet wine cooler is fully inserted into
outlet.
Cabinet Temperature Temperature setting Verify the temperature control setting.
too High adjust if neccessary.
Door not shut properly Ensure that the door is fully closed
or opened excessively and that the gasket is sealing against
the cabinet. Open the door only as
needed and for short periods of time.
Exhaust vent is obstructed Verify there is nothing blocking the
front mounted exhausting vent.
Recently added a large Limit the quantity of warm bottles
quantity of warm bottles being introduced to the cabinet at the
to the cabinet same time. Attempt to phase in the
load introduction if possible.
Condensation on the High humidity conditions The condensation will subside once
cabinet and/or door in the home humidity conditions return to normal.
Door not shut properly Ensure that the door is fully closed
or opened excessively and that the gasket is sealing against
the cabinet. Open the door only as
needed and for short periods of time.