Danby DWC516BLS - Manual (Page 7)

6
Operating Instructions
1
2 3
4 5
Setting the
Temperature
• To switch the display
between the Fahrenheit (
°F)
and Celsius ( °C) scale,
depress the ‘Set Upper’ and
‘Set Lower’ control buttons
simultaneously for approximate-
ly five (5) seconds.
• The temperature range can
be set as low as 39
°F (4°C) or
as high as 64 °F (18°C) to suit
your specific wine storage
requirements. Each depres-
sion of the ‘Set Upper’ or ‘Set
Lower’ button will allow you to
adjust the temperature in 1
°
degree increments within the
aforementioned range.
• You may view your ‘set’ tem-
perature at any time by briefly
depressing either the ‘Set
Upper’
or ‘Set Lower’ button.
The set temperature will flash
in the display area for 5 sec-
onds before the display
resumes showing the
current
cabinet temperature.
Please note: In the event of a
power failure or interruption,
all modified settings are lost
and the default settings are
used once power resumes.
The Controls of
your Wine Cooler
1. Run: Indicator light illuminates to signify
the cooling mode is currently in opera-
tion.
2. Upper Chamber Display: Display
screen shows current cabinet tempera-
ture and set temperature of the upper
zone.
3. Lower Chamber Display: Display
screen shows current cabinet tempera-
ture and set temperature of the lower
zone.
4. C° / F°
Adjacent indicator light denotes which
scale of temperature is displayed.
5. ‘Set Upper’ Button - Used to set the
temperature in the upper zone (see
‘Setting the Temperature below).
‘Set Lower’ Button - Used to set the
temperature in the lower zone (see
‘Setting the Temperature below).
When you plug in your
wine cooler for the first
time, the temperature will
automatically be set to
45°F (7°C) and 54°F (12°C)
in the lower and upper
compartments respective-
ly, and will be displayed
in the Fahrenheit scale