Connecting the ipodĥ, Using this feature, Connecting the ipod – Dodge 2011 Ram Truck Chassis Cab User Manual

Page 237

Advertising
background image

UCI supports Mini, 4G, Photo, Nano, 5G iPod

௡ and

iPhone

௡ devices. Some iPod௡ software versions may not

fully support the UCI features. Please visit Apple’s
website for software updates.

NOTE:

• If the radio has a USB port, connecting an iPod௡ to this

port does not play the media. For playing an iPod

௡,

use the separate 16–pin connector port (in the glove
compartment on some vehicles).

• Connecting an iPod௡ to the AUX port located in the

radio faceplate, plays media, but does not use the UCI
feature to control the connected device.

Connecting The iPod

ா

Use the provided connection cable to connect an iPod

௡ to

the vehicle’s 16–pin connector port (which is located in
the glove compartment on some vehicles). Once the
iPod

௡ is connected and synchronized to the vehicle’s UCI

system (iPod

௡ may take a few seconds to connect), the

iPod

௡ starts charging and is ready for use by pressing

radio switches, as described below.

NOTE:

• It may be necessary to remove the connector pin

protection cap from the 16–pin connector port, prior to
connecting the cable.

• If the iPod௡ battery is completely discharged, it may

not communicate with the UCI system until a mini-
mum charge is attained. Leaving the iPod

௡ connected

to the UCI system may charge it to the required level.

Using This Feature
By using the provided connection cable to connect an
iPod

௡ to the vehicle’s UCI 16–pin connector port:

• The iPod௡ audio can be played on the vehicle’s sound

system, providing metadata (artist, track title, album,
etc.) information on the radio display.

236

UNDERSTANDING YOUR INSTRUMENT PANEL

Advertising