Dodge 2011 Ram Truck Chassis Cab - Manual (Page 417)

NOTE: For lighted switches, see your authorized dealer
for replacement instructions.
All of the inside bulbs are brass or glass-wedge base.
Aluminum base bulbs are not approved.
LIGHT BULBS – Exterior Bulb No.
Center High Mounted Stop Lamp (CHMSL) . . . . . 921
Fog Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9145
Dual Headlamp . . . . . . . . . . . . . . . . . . . . . . . . . H13
Quad Headlamp – Low Beam . . . . . . . . . . . . . . . H11
Quad Headlamp – High Beam . . . . . . . . . . . . . . 9005
Side Marker (Dual Headlamp) . . . . . . . . . . . . . 3157K
Side Marker (Quad Headlamp). . . . . . . . . . . . 3157NA
Rear Cargo Lamp . . . . . . . . . . . . . . . . . . . . . . . . 921
Cab Roof Marker Lamps . . . . . . . . . . . . . . . . . 194NA
BULB REPLACEMENT
Dual or Quad Headlamp/Front Park and Turn
Signal – If Equipped
1. Open the hood.
2. Disconnect and isolate the negative battery cable.
3. Remove the four plastic push-in fasteners that secure
the upper radiator seal to the grille support and both
fender ledges.
4. Remove the two plastic push-in rivets that secure the
upper radiator seal to the radiator.
5. Remove the upper radiator seal from the vehicle.
6. Remove the two headlamp assembly attachment
screws.
416 MAINTAINING YOUR VEHICLE