Tire chains, Supplemental tire pressure information, If equipped – Dodge 2011 Ram Truck Chassis Cab User Manual

Page 314

Advertising
background image

SUPPLEMENTAL TIRE PRESSURE
INFORMATION — IF EQUIPPED
A light load vehicle condition is defined as two passen-
gers [150 lbs (68 kg) each] plus 200 lbs (91 kg) of cargo.
Cold tire inflation pressures for a lightly loaded vehicle
will be found on the face of the driver’s door.

TIRE CHAINS
Use “Class U” chains or other traction aids that meet SAE
Type “U” specifications.

NOTE:

Chains must be the proper size for the vehicle,

as recommended by the chain manufacturer.

CAUTION!

To avoid damage to your vehicle, tires or chains,
observe the following precautions:

(Continued)

CAUTION! (Continued)

• Because of limited chain clearance between tires

and other suspension components, it is important
that only chains in good condition are used. Bro-
ken chains can cause serious vehicle damage. Stop
the vehicle immediately if noise occurs that could
suggest chain breakage. Remove the damaged
parts of the chain before further use.

• Install chains as tightly as possible and then

retighten after driving about 1/2 mi (0.8 km).

• Do not exceed 45 mph (72 km/h).
• Drive cautiously and avoid severe turns and large

bumps, especially with a loaded vehicle.

• Do not install tire chains on front wheels of 4x2

vehicles.

• Do not drive for a prolonged period on dry pave-

ment.

(Continued)

5

STARTING AND OPERATING

313

Advertising