To arm the system – Dodge 2010 Viper SRT10 Coupe User Manual

Page 16

Advertising
background image

To Arm the System

Remove the key from the ignition switch and either press
a power door LOCK switch while the driver’s or passen-
ger’s door is open or press the LOCK button on the
Remote Keyless Entry (RKE) transmitter. After the last
door is closed, or if all doors are closed, the system will
arm itself in approximately 16 seconds. During the
arming process, the Vehicle Security Light will flash at a
fast rate. Once the system is armed, the light will flash
once every six seconds.

NOTE:

• The system will not cancel the arming process if you

open the hood or trunk/liftgate. It will, however,
cancel the arming process if you open a door or turn

Vehicle Security Light

14

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising
This manual is related to the following products: