Dodge 2010 Viper SRT10 Coupe - Manual (Page 262)

7. Pull the bulb out of the socket assembly.
8. Push the replacement bulb into the socket assembly.
9. Reinstall the bulb and socket assembly into the lower
lamp assembly, and then turn it clockwise.
10. Reinstall the three bulb and socket assemblies into
the upper lamp assembly, and turn them clockwise.
11. Reinstall the upper lamp assembly and the three
retaining nuts.
12. Install the access panel and the two fasteners.
13. Close the trunk.
2 — Rear Turn Signal Lamp
260 MAINTAINING YOUR VEHICLE