Dodge 2010 Viper SRT10 Coupe - Manual (Page 257)

Front Fog Lamp
1. Remove the push pin from the upper outer corner of
the splash shield and remove the splash shield.
2. Turn the bulb and socket assembly counterclockwise,
and then pull it out of the front fog lamp assembly.
3. Pull the bulb out of the socket assembly.
4. Push the replacement bulb into the socket assembly.
5. Reinstall the bulb and socket assembly into the front
fog lamp assembly, and then turn it clockwise.
6. Install the splash shield and push pin.
7
MAINTAINING YOUR VEHICLE 255