Wiring diagram, Specifications, Cleaning and maintenance – Desa EFS33NR EN User Manual

Page 20: Continued

Advertising
background image

107172-01J

20

For more information, visit www.desatech.com

For more information, visit www.desatech.com

AUT

O

OF

F

ON

Thermopile

WIRING DIAGRAM

Note

: For proper operation of optional accessories, the wires from

the switch to the control must be connected exactly as shown.

SPECIFICATIONS

MODELS EFS33NR, EFS33NRA, VSGF33NR, and
VSGF33NRA

Btu (Variable)

20,000/33,000

Type Gas

Natural Gas Only

Ignition

Piezo

Pressure Manifold

3.5" W.C.

Inlet Gas Pressure (in. of water)

Maximum

10.5"

Minimum*

5"

Shipping Weight

122 lbs.

* For input adjustment

MODELS EFS33PR, EFS33PRA, VSGF33PR, and
VSGF33PRA

Btu (Variable)

20,000/33,000

Type Gas

Propane/LP Only

Ignition

Piezo

Pressure Manifold

7.9" W.C.

Inlet Gas Pressure (in. of water)

Maximum

13"

Minimum*

11"

Shipping Weight

122 lbs.

* For input adjustment

CLEANING AND MAINTENANCE

Cleaning Burner Injector Holder and Pilot Air Inlet Hole (Cont.)
Logs

WIRING DIAGRAM
SPECIFICATIONS

LOGS

• If you remove logs for cleaning, refer to Installing Logs, pages

14 and 15, to properly replace logs.

• Replace log(s) if broken or chipped (dime-sized or larger).

Figure 42 - Injector Holder On Outlet Burner Tube

Burner
Tube

Injector Holder

Primary Air
Inlet Holes

Ports/Slots

Figure 43 - Pilot Inlet Air Hole

Burner
Tube

Pilot
Assembly

Pilot Air
Inlet Hole

Ports/Slots

CLEANING AND
MAINTENANCE

Continued

Advertising
This manual is related to the following products: