Datamax E-3202 User Manual

Page 20

Advertising
background image

12

E-3202/Cash Drawer Printer

4.1.4 Other Modes

There are only three possible error conditions, they are as follows:

Error

Cause

Action

Paper Out

The printer is out of media stock or
the stock has been loaded incorrectly.

Replace or correctly load
Stock.

Head Up

The printer ‘Lid’ is not down and
latched.

Be sure the ‘Lid’ is
down and latched.

Printhead
Overheated

The printhead has exceeded normal
operating temperature.

Allow 5-10 minutes for
the printhead to cool.

Once the error condition has been satisfied the printer will automatically
exit the ERROR mode and return to the OFFLINE mode. To return to
the ONLINE mode and continue printing, press the Left Button once.

This mode will allow the user to verify the data received by the printer.
While in dump mode, the printer will print the received data in
hexadecimal.

To enter DUMP mode:

With the printer off, (both LED’s off), press and hold the Left Button
until the word “DUMP” is printed.

To exit DUMP mode:

Turn the printer off, (press and hold Left Button) or disconnect power.

Advertising