Datamax E-3202 - Manual (Page 30)

22 E-3202/Cash Drawer Printer
Printing The List Of Parameters
While the printer is turned OFF, switch to the Setting Mode by pushing
simultaneously both buttons for at least two seconds. The printer prints
the following settings (Standard configuration):
Datamax E-3202
Version: AA xx.xx
PRESENT SETTINGS
Communication parameters
Speed: 9600 baud
Data: 8 bits
Parity: None
Control: Hardware
Ø To keep these settings unchanged push the ‘NO’ key.
Ø To enter the set-up menu push the ‘YES’ key.
Set-up menu
To change settings:
Ø Use the ‘No’ key to move from a chapter (section) to another.
Ø Use the ‘YES’ key to enter a chapter (section).
Within a chapter (section):
Ø Use the ‘No’ key to move from a parameter to another.
Ø Use the ‘Yes’ key to validate your parameter.