Datamax E-3202 - Manual (Page 38)

30 E-3202/Cash Drawer Printer
Problem/Symptom Resolution
SOFTWARE
The printout includes
linear gaps between
lines of print. Disable the AUTO LF and AUTO FF in the
E-3202 configuration.
The printer will not print. Make sure that you have configured your
printer correctly. Verify the following
settings:
• Select an emulation that will
accommodate your PC’s software
(ESC/POS
 or Epson 24 pin).
• Make sure that your printer’s COM port
settings match those of your PC.
• Make sure that you have a roll of print
media properly loaded in the printer.
The printer produces
garbage characters
when it prints. Make sure that you have selected the
correct emulation. Also make sure that your
printer’s COM port settings match those of
your PC and the printer is not in “Dump”
mode.