Deutsche Telekom T-Eumex 504PC SE - Manual (Page 29)

21
Telephoning
Making Calls Using Speed-dialling
The Eumex 504PC SE saves up to 100 speed-dialling numbers (or "destinations").
You use the PC Configurator to enter the speed-dialling destinations and to assign
them speed-dialling codes or names (necessary for the vanity function).
You select a speed-dialling destination by means of a double-digit speed-dialling
code (00 - 99), or by means of the vanity function. The vanity function enables you to
use the letters printed on the keys instead of the digits to select a speed-dialling desti-
nation. For example, to enter the name "Jane," you would press the keys 5 (J) -2 (A) - 6
(N) - 3 (E). Vanity numbers must be completed by pressing the hash key.
terminal and does not depend on the subscriber’s external access levels (see p. 51).
Note:
You cannot use speed-dialling during an enquiry call.
Dialling a speed-dialling number using the speed-dialling code
Lift the handset. You hear an internal or external dialling tone.
Press the R-key
(only in the case of automatic external line seizure).
Select the code digit 6.
Then select a double-digit speed-dialling code number between 00 and 99.
The corresponding telephone number will be dialled.
Conduct your conversation.
b
(
r
)
6
t
c
Every internal subscriber can be granted the right to use speed-dialling destinations.
This can be done from the PC Configurator (see p. 70) or from a connected analogue