Deutsche Telekom T-Eumex 504PC SE - Manual (Page 45)

37
External Line Access and Speed-dialling Numbers
If you have reduced an internal subscriber’s external line access level in the configu-
ration mode, the subscriber concerned can still call all destinations in the speed-
dialling memory locations as long as speed dialling is active. This is also valid for des-
tinations outside the specified access levels (see the chapter entitled "Blocking/
Releasing Speed-dialling for Internal Lines without External Access" on p. 51 or
"Menu: Internal Lines" in the chapter entitled "Configuring the System" on p. 70) .
Special Settings/Features
Using Call Through
Make a call from a terminal not connected to your Eumex 504PC SE to the MSN
selected for this purpose. You hear an external dialling tone.
Enter the Eumex 504PC SE PIN. If the wrong PIN is entered, your call will be discon-
nected.
Now dial the desired number. The connection is established on the second B-chan-
nel.
Note: you require a DTMF-capable terminal to use the call-through feature.
t
t
t