3xLOGIC VISIX Camera - Manual (Page 12)

Hardware Install Manual | VISIX 360 Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC 12
2.2 Wall/Ceiling Mounting with a Slant Mounting Base
(Product #: VX-ISM-360)
The wall/ceiling mounting with a slant mounting base provides a wider surveillance view compared to the wall
mounting(when positioned correctly). You need to purchase a slant mounting base separately if this mounting
method is selected.
3xLOGIC Product Number: VX-ISM-360
Steps:
1. Fix the slant mounting base to the wall with the screws.
Figure 2-5 Fix the Slant Mounting Base
2. Screw the three screws half-deep to the mounting base.
Figure 2-6 Hammer the Screws
1. Connect the corresponding power cable, network cable, audio and alarm cables.
2. Align the screw holes to the inserted screws, hook the camera body to the screws, and route the camera
body to secure the camera with the screws.
3. Screw the half-deep screws into the wall totally.
4. Install the camera cover to the camera body, and fix them by tightening the lock screw on the camera
cover.