3xLOGIC VISIX Camera - Manual (Page 5)

Hardware Install Manual | VISIX 360 Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC 5
Safety Instruction
These instructions are intended to ensure that the user can use the product correctly to avoid danger or property
loss.
The precaution measure is divided into ‘Warnings’ and ‘Cautions’:
Warnings: Serious injury or death may be caused if any of these warnings are neglected.
Cautions: Injury or equipment damage may be caused if any of these cautions are neglected.
Warnings Follow these safeguards to
prevent serious injury or death.
Cautions Follow these precautions to
prevent potential injury or material
damage.
Warnings:
 Please adopt the power adapter which can meet the safety extra low voltage (SELV) standard. And source
with 12 VDC or 24 VAC (depending on models) according to the IEC60950-1 and Limited Power Source
standard.
 If the product does not work properly, please contact your dealer or the nearest service center. Never
attempt to disassemble the camera yourself. (We shall not assume any responsibility for problems caused
by unauthorized repair or maintenance.)
 To reduce the risk of fire or electrical shock, do not expose this product to rain or moisture.
 This installation should be made by a qualified service person and should conform to all the local codes.
 Please install blackouts equipment into the power supply circuit for convenient supply interruption.
 Please make sure that the ceiling can support more than 50(N) Newton gravities if the camera is fixed to
the ceiling.
 If the product does not work properly, please contact your dealer or the nearest service center. Never
attempt to disassemble the camera yourself. (We shall not assume any responsibility for problems caused
by unauthorized repair or maintenance.)