3xLOGIC VISIX Camera - Manual (Page 9)

Hardware Install Manual | VISIX 360 Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC 9
Table 1-1 Description of Overview
No. Description No. Description
1
Camera
Body 7 D- D+:
RS-485
Interface
2 Reset 8 DV-12V:
Power
Interface
3 Micro SD
Card Slot 9 Audio In
4 Camera
Cover 10 Audio Out
5 IN G 1A 1B:
Alarm
Interfaces 11 COAX: Video
Out/Monitor
Out
6 Ethernet
Interface
1.2 Disassembling the Camera
Steps:
1. Loosen the lock screw on the camera cover.
2. Remove the camera cover, and you can see the oval dismountable sheet.
3. Loosen the two screws on the dismountable part.
4. Move the oval sheet aside, and you can see the reset button and the micro SD card slot.
Figure 1-3 Move the Oval Sheet Aside
Press and hold RESET for 10s when the camera is powering on or rebooting to restore the default settings,
including the user name, password, IP address, port No., etc.
Oval Sheet