ADLINK NEON-1020 - Manual (Page 29)

Getting Started 19
NEON-1020/1040
2.4 Connecting a power cable
1. Align the alignment pin (device side) with the alignment
channel (cable side)
Figure 2-3: Power Alignment Pin (device side)
2. Fully insert the cable connector.
3. Tighten the threaded collar (cable side) to fix the connec-
tion.
2.5 Operating System Installation
The NEON-1020/1040 is compatible with Windows Embedded
Standard 7 (WES7E),and supports File-Based Write Filter
(FBWF), providing a stable, secure, and high performance
software operating environment. The device OS is pre-installed.
For other OS support, please contact ADLINK directly.
2.6 Driver Installation
While the following describes NEON-1020/1040 driver installation
for WES 7 and Windows 7, with other Windows systems following
similar procedures.
1. Run Setup, installation begins.