ADLINK PCI-C588/PCIe-C588/C584 - Manual (Page 24)

12
• Software Installation
5. Follow the configuration dialog boxes to finish the PCIPORT
card's driver. Ensure that the COM port number does not con-
fliction with another card.
6. After completing the above procedures, select a "Binding" func-
tion to open up more serial ports. If you do not do the "Binding"
function, you may not have the extra COM ports available after
reboot.
For multi-PCIPORT card installation, note the following:
1. To install two of the same PCIPORT cards in one NT system, set
one card's jumper to “ON” and the other to “OFF”.
2. The card with the “ON” jumper will have lower COM port number.
The card with the “OFF” jumper will have its COM port number
subsequently following the “ON” card.
3. We suggest users set the jumper “ON” for the first card to be in-
stalled in one NT system.
4. Please confirm that there are not any IRQ conflicts with other
card. Please disable USB controller in the BIOS (if applicable).
We do not support USB drivers in Windows NT.