ADLINK PCIS-8580-13S - Manual (Page 25)

Hardware Overview 17
Peripheral / System Slot Selection, JP3
LPCI-8575 is a dual purpose PCI-to-PCI expansion module.
When LPCI-8575 plugged into a peripheral, it becomes a
peripheral card. When LPCI-8575 plugged into the expansion
chassis system slot, it becomes a system card.
(Default)
Auto detection mode disabled, force to 33MHz. PCI bus is
forced to operate at 33 MHz. If your extended system is
66MHz capable, please switch JP2 to 1-2 contact.
JP3 Setting Descriptions
(Default)
Auto selection. LPCI-8575 will detect the slot
configuration automatically.
Force to Peripheral slot.
Force to system slot.
Table 3-4: JP3 Settings
JP2 Setting
Table 3-3: JP2 Settings