ADLINK aTCA-N700 - Manual (Page 18)

aTCA-RN720 User's Guide
18
(*screen capture of the results)
4.3.3 Retimer Access
To check the Retimer status, refer to the following example. More specific parameter settings for
the retimer should refer to Section 6.2 and GN2405A datasheet from Gennum.
=>i2c dev 3
=>i2c mw 0x73 0x0 0x8; i2c probe
=>i2c mw 0x73 0x0 0x9; i2c probe
=>i2c mw 0x73 0x0 0xa; i2c probe
=>i2c mw 0x73 0x0 0xb; i2c probe
=>i2c mw 0x73 0x0 0xc; i2c probe
=>i2c mw 0x73 0x0 0xd; i2c probe
(*screen capture of the results)