ADLINK cPCI-3970 Series - Manual (Page 94)

80 Getting Started
6. Align the male board-to-board connector (CN1) of the
PMC/XMC assembly to the female board-to-board connec-
tor (CN7) of the layer-2 daughter board and press down.
7. Secure the PMC/XMC assembly to the layer-2 daughter
board using the four screws removed in Step 2 above.
8. Remove the PMC filler faceplate from the front panel.
9. Install the front panel to the cPCI-3970P/U by reversing
Step 1.