ADLINK cPCI-3620 - Manual (Page 86)

74 BIOS Setup Utility
8.3.6 IDE Configuration
You can use this screen to select options for the IDE Configuration
Settings. Use the up and down < Arrow > keys to select an item.
Use the < + > and < - > keys to change the value of the selected
option. A description of the selected item appears on the right side
of the screen. The settings are described on the following pages.
OS Selection
This item specifies support for Windows 8.x or Windows 7.
SATA Speed Support
Set SATA supports to Gen1 or Gen2.
SATA Mode
Select IDE or AHCI mode.
Serial-ATA Port 0
Enable/Disable Serial ATA Port 0
Serial-ATA Port 1
Enable/Disable Serial ATA Port 1
NOTE: NOTE:
This item also sets CSM Configuration > Boot Option Filter /
Storage / Video to UEFI only or Legacy only.