ADLINK CT-6530 - Manual (Page 17)

Specifications 5
cPCI-6530
2 Specifications
2.1 cPCI-6530 Processor Blade Specifications
CompactPCI®
Standards • PICMG® 2.0 CompactPCI® Rev. 3.0
• PICMG® 2.1 Hot Swap Specification Rev. 2.0
• PICMG® 2.9 System Management Rev. 1.0
• PICMG® 2.16 Packet Switching Backplane Rev. 1.0
Mechanical • Standard 6U CompactPCI®
• Board size: 233mm x 160mm
• Single slot (4HP, 20.32mm)
• CompactPCI® connectors: J1, J2, J3, J4, J5
Processor • Intel® Core™ i7-4700EQ Processor, 2.4 GHz (3.4 GHz Turbo),
6MB LLC cache, TDP 45W
• Intel® Core™ i5-4402E Processor, 1.6 GHz (2.7 GHz Turbo),
3MB LLC cache, TDP 25W
• Passive heatsink
Chipset • Mobile Intel® QM87 Express Chipset
Memory • Dual channel DDR3L-1600 ECC memory, max. support 16GB
• One channel onboard soldered DDR3L-1600 ECC up to 8GB
• One channel socket DDR3L-1600 ECC up to 8GB
CompactPCI
Bus • PCI 64-bit/66MHz; 3.3V, 5V universal V I/O
• Supports operation in system slot as master or in peripheral
slot with connectivity to CompactPCI bus (Universal mode)
• Supports operation in peripheral slot as standalone CPU
board when no host blade in host slot
Gigabit
Ethernet • One PCIe x1 Intel® I217 GbE PHY and three PCIe x1 Intel®
I210 Gigabit Ethernet controllers
• Two egress 10/100/1000BASE-T ports on front panel, one
supporting Intel® AMT 9.0 by I217 controller
• Two egress 10/100/1000BASE-T ports routed to rear
transition module
Graphics • Integrated on Intel® Core™ processor, Intel® HD Graphics
4600
• One DVI-I port on front panel, one DVI, eDP routed to J3 & J5
(RTM)
• Up to three independent display with selected rear transition
module (cPCI-R6700 & cPCI-R6500)
Table 2-1: cPCI-6530 Processor Blade Specifications