ADLINK cPCI-6525 - Manual (Page 43)

Board Interfaces 33
cPCI-6525
4.5 Buttons, Switches and Jumpers
See “cPCI-6525 Front Panel” on page 21 and “Board Layout -
Front” on page 19 for switch locations.
System Reset Button
The cPCI-6525 has a system reset button on the front panel.
See “cPCI-6525 Front Panel” on page 21 for the button location.
Load BIOS Default Button (SW1)
Press switch SW1 to load the default BIOS settings.
PCIe x16/x8 Selection Jumper (SW9)
Switch SW9 sets the PCI Express signals on J4 to PCIe x16 (UP,
default) or 2x PCIe x8 (DOWN).