ADLINK cPCI-6520 - Manual (Page 99)

BIOS Setup 87
cPCI-6520
Flow Control
Set this option to select Flow Control for console redirection.
The settings for this value are None, Hardware RTS/CTS.
VT-UTF8 Combo Key Support
Enables VT-UTF8 combination key support for ANSI/VT100
terminals.Set this value to Enabled/Disabled.
Recorder Mode
When this mode is enabled, only text will be sent. This is to
capture terminal data. Set this value to Enabled/Disabled.
Resolution 100x31
Set this option to extended terminal resolution. Set this value to
Enabled/Disabled.
Legacy OS Redirection
On legacy OS, the number of rows and columns supported for
redirection. Set this value to 80x24, 80x25.
Putty Key Pad
Select FunctionKey and KeyPad on Putty. Set this value to
VT100, LINUX, XTERMR6, SCO, ESCN, VT400.
Serial Port for Out-of-Band Management/Windows Emer-
gency Management Services (EMS)
The following functions control the presence and content of the
ACPI serial port redirection table (SPCR). This table is mainly
used by the Windows server variants to provide Windows Emer-
gency Management Services (EMS). This functionality is totally
independent from serial redirection of other console output. OoB
Management or EMS makes it possible to control selected compo-
nents of (Windows) servers, even when a server is not connected
to the network or the network is not available. In short: EMS allows
for remote management of a Windows Server OS through a serial
port