ADLINK cPCI-6965 - Manual (Page 73)

Getting Started 59
cPCI-6965
5.6 USB Flash Disk Module Installation
The cPCI-6965 Series supports an onboard USB Flash Disk mod-
ule via the CN5 pin header connector. To install a USB Flash Disk,
follow the procedure below.
1. Secure the standoff to the underside of the USB module
with the screw provided.
2. Align the USB module with the CN5 pin header and
mounting hole as shown.
3. Insert the USB module onto the pin header and secure
with the screw provided from the solder side of the
cPCI-6965.