4 getting started, 1 installing the module, Chapter 4, getting started: describes the – ADLINK XMC-E540 User Manual
Page 25: Installing the module, 4getting started
Advertising
Getting Started
13
XMC-E540
4
Getting Started
4.1
Installing the Module
1. Remove the XMC slot filler faceplate from the front panel
of the host board.
2. Insert the faceplate of the XMC module into the XMC slot
in the front panel of the host board.
3. Carefully align the male connectors of the XMC module
(component-side down) to the female connectors of the
host board and firmly press down.
4. Secure the XMC module with the four screws provided
from the bottom side of the host board.
Advertising