ADLINK cPCI-3E12 - Manual (Page 13)

Introduction 1
cPCI-3E10
1 Introduction
1.1 Overview
The cPCI-3E10 Series is 3U CompactPCI Gigabit Ethernet periph-
eral card equipped with Intel® 82574L PCIe Gigabit Ethernet con-
trollers. The cPCI-3E10 provides four GbE ports on the front panel
(RJ-45) with two switchable to the rear transition module, the
cPCI-3E12 provides two GbE ports on the front panel (RJ-45), and
the cPCI-3E10-SUB provides two Fast Ethernet ports on the front
panel (DB-9).
An optional Rear Transition Module (cPCI-R3E10) is available to
provide rear access to the GbE ports switched from the
cPCI-3E10 front panel.
1.2 Features
X Standard 3U 4HP CompactPCI form factor
X Up to 64-bit/66MHz CompactPCI Interface
X Up to four Intel® 82574L Ethernet controllers with fully-inte-
grated GbE MAC & PHY
X Four or two 10/100/1000BASE-T Gigabit Ethernet ports via
RJ-45 connectors
X Two LAN ports switchable to rear (cPCI-3E10 only)
X Two Fast Ethernet ports via D-sub 9-pin connectors
(cPCI-3E10-SUB only) for harsh environment applications
X PICMG® 2.0 R3.0 compliant
CAUTION:
This product must be protected from static discharge and phys-
ical shock. Never remove any of the components except at a
static-free workstation. Use the anti-static bag shipped with the
product when putting the board on a surface. Wear an
anti-static wrist strap properly grounded on one of the system's
ESD ground jacks when installing or servicing system compo-
nents.