ADLINK Express-CBR - Manual (Page 41)

Chapter 4 BIOS Setup
Express-CBR Reference Manual 37
• No Snoop [Disabled; Enabled]
• Maximum Payload [Auto; 128 Bytes; 256 Bytes; 512 Bytes; 1024 Bytes; 2048 Bytes;
4096 Bytes]
• Maximum Read Request [Auto; 128 Bytes; 256 Bytes; 512 Bytes; 1024 Bytes; 2048 Bytes;
4096 Bytes]
♦ PCI Express Link Settings
• ASPM Support [Disabled; Auto; Force L0]
WARNING: Enabling ASPM may cause some PCI-E devices to fail
• Extended Synch [Disabled; Enabled]
• ACPI Settings
♦ Enable ACPI Auto Configuration [Disabled; Enabled]
♦ Enable Hibernation [Disabled; Enabled]
♦ ACPI Sleep State [Suspend Disabled; S1 (CPU Stop Clock); S3 (Suspend to RAM)]
♦ Trusted Computing
• TPM SUPPORT [Disabled; Enabled]
• Current TPM Status Information [depends on board model]
• CPU Configuration
♦ Processor Type Intel(R) Core(TM) i7 CPU
♦ EMT64 Supported
♦ Processor Speed XXXX MHz
♦ Processor Stepping XXXXX
♦ Microcode Revision X
♦ Processor Cores X
♦ Intel HT Technology Supported
♦ Hyper-Threading [Disabled; Enabled]
♦ Active Processor Cores [All; 1; 2]
♦ Limit CPUID Maximum [Disabled; Enabled]
♦ Hardware Prefetcher [Disabled; Enabled]
♦ Adjacent Cache Line Prefetch [Disabled; Enabled]
♦ Intel Virtualization Technology [Disabled; Enabled]
♦ Power Technology [Disable; Energy Efficient; Custom]
• SATA Configuration
♦ SATA Port0 [depends on board model]
♦ SATA Port1 [depends on board model]
♦ SATA Port2 [depends on board model]
♦ SATA Port3 [depends on board model]
♦ SATA Port4 [depends on board model]
♦ SATA Port5 [depends on board model]
♦ SATA Mode [Disable; IDE Mode; AHCI Mode; RAID Mode]