ADLINK LEC-3517 - Manual (Page 12)

8 Overview
P119 GPIO11 S120 LCD_DE
P120 GND P121 LCD_VS
P121 I2C_PM_CK S122 LCD_HS
P122 I2C_PM_DAT S123 LCD_PCK
P123 BOOT_SEL0# S124 GND
P124 BOOT_SEL1# S125 Not connected
P125 BOOT_SEL2# S126 Not connected
P126 RESET_OUT# S127 LCD_BKLT_EN
P127 RESET_IN# S128 Not connected
P128 POWER_BTN# S129 Not connected
P129 SER0_TX S130 GND
P130 SER0_RX S131 Not connected
P131 SER0_RTS# S132 Not connected
P132 SER0_CTS# S133 LCD_VDD_EN
P133 GND S134 Not connected
P134 SER1_TX S135 Not connected
P135 SER1_RX S136 GND
P136 SER2_TX S137 Not connected
P137 SER2_RX S138 Not connected
P138 SER2_RTS# S139 I2C_LCD_CK
P139 SER2_CTS# S140 I2C_LCD_DAT
P140 SER3_TX S141 LCD_BKLT_PWM
P141 SER3_RX S142 Not connected
P142 GND S143 GND
P143 CAN0_TX S144 Not connected
P144 CAN0_RX S145 WDT_TIME_OUT#
P145 Not connected S146 Not Connected
P146 Not connected S147 VDD_RTC
P147 VDD_IN S148 LID#
P148 VDD_IN S149 SLEEP#
P149 VDD_IN S150 VIN_PWR_BAD#
P150 VDD_IN S151 CHARGING#
P151 VDD_IN S152 CHARGER_PRSNT#
P152 VDD_IN S153 CHARGER_STBY#
P153 VDD_IN S154 CARRIER_PWR_ON
P154 VDD_IN S155 FORCE_RECOV#
P155 VDD_IN S156 BATLOW#
P156 VDD_IN S157 TEST#
S158 VDD_IO_SEL#
Table 1-7: SMARC P-S Connector Signal Descriptions (Continued)