3 camera 1 (cam1), 4 camera 3 (cam3), Camera 1 (cam1) – ADLINK LEC-BASE R1 User Manual
Page 17: Camera 3 (cam3)
![background image](/manuals/733593/17/background.png)
Interface Signals
11
LEC-BASE
2.1.3
Camera 1 (CAM1)
Table 2-6 lists the pin signals of the Camera1 header, which provides 10-pins, 2 rows, odd/even
pin sequence (1, 2) with 0.079" (2.00mm) pitch. These signals are connected to the camera
control signals at the SMARC connector.
NOTE: The shaded table cells denote ground.
2.1.4
Camera 3 (CAM3)
Table 2-7 lists the pin signals of the Camera 3 header, which provides 10-pins, 2 rows, odd/even
pin sequence (1, 2) with 0.079" (2.00mm) pitch. These signals are connected to the camera
control signals at the SMARC connector.
Table 2-6: Camera 1 Pin Signals (CAM1)
Pin #
Signal
1
CSI0_CK+
2
CSI0_CK-
3
CSI0_D0+
4
CSI0_D0-
5
CSI0_D1+
6
Not Connected
7
CSI0_D1-
8
Not Connected
9
GND
10
GND
Table 2-7: Camera 3 Pin Signals (CAM3)
Pin #
Signal
1
CAM0_nPWR
2
I2C_CAM_CLK_1.8V
3
Not Connected
4
I2C_CAM_DATA_1.8V
5
Not Connected
6
Not Connected
7
CAM0_nRST_3V over the 3.3V level shifter
8
Not Connected
9
5 Volt
10
Not Connected