6 connectors and pinouts, 1 etx module signals, 2 pin-out compatibillity – ADLINK ETX-Proto User Manual
Page 13: Etx module signals, Pin-out compatibillity, X4 x3, X2 x1
Advertising
Page 13
ETX-Proto User’s Manual
6 Connectors and Pinouts
6.1 ETX Module Signals
- Ethernet
- IDE1 / IDE2
- Power Signals
- Speaker, Battery
- I
2
C & SMBus
X4
X3
- VGA / LCD/ Video
- COM1 / COM2
- LPT1
- IrDA
- Mouse
- Keyboard
- ISA bus
X2
X1
- 32-bit PCI bus
- USB
- Audio
6.2 Pin-Out Compatibillity
All pin-outs on X1, X2, X3 and X4 on the ETX-Proto comply with pin-out and signal descrip-
tion used in the original “ETX Specification ver 2.6”. This document includes a description of
pin-outs, signal descriptions and mechanical characteristics of the ETX formfactor.
An addtional document called “ETX Design Guide” is a general introduction to carrier board
design for ETX core modules.
Advertising