Com1 mode switch (sw13), 6 driver installation, Driver installation – ADLINK NuPRO-E72 User Manual
Page 43
![background image](/manuals/733614/43/background.png)
Getting Started
31
NuPRO-E72
COM1 Mode Switch (SW13)
2.6
Driver Installation
This chapter provides information on how to install the NuPRO-
E72 device drivers under Windows 7 64-bit. The device drivers are
located in the following ADLINK All-in-One DVD directories:
Install the Windows operating system before installing any driver.
Most standard I/O device drivers are installed during Windows
installation.
DIP #1
DIP #2
COM1 Mode
On
Off
RS-232
On
On
RS-422
Off
On
RS-485
Chipset
\NuPRO\NuPRO-E72\Chipset\
Display
\NuPRO\NuPRO-E72\VGA\
Ethernet
\NuPRO\NuPRO-E72\Ethernet\
Rapid Storage
\NuPRO\NuPRO-E72\Others\RST\
USB 3.0
\NuPRO\NuPRO-E72\Others\
Management
Engine
\NuPRO\NuPRO-E72\Others\ME_Driver\
NOTE:
NOTE:
In order to enable RAID or AHCI mode, you must pre-install the
Intel® Rapid Storage Technology driver during the Windows*
installation process. using the F6 installation method.
*Not required for Windows Vista and Windows 7.
ON
1
2
3
ON
1 2