ADLINK HPERC-IBR-MC - Manual (Page 38)

28
4) Disconnect the FPC connector from its mating connector on the system as shown in
Figure 2-13.
Figure 2-13: Exploded View of HPERC-IBR-M with Flexible Printed Circuit Connector
5) Remove the screws securing the interface board to the system, and remove the interface
board as shown in Figure 2-15.
Figure 2-14: Exploded View of HPERC-IBR-M with interface board
FPC Connector
Flexible Printed Circuit
Interface Board Screws
Interface Board