ADLINK iSeries Monitor 18/21 - Manual (Page 17)

Introduction 5
TPZ-1300
Electronic Considerations and Requirements
The System is intended for use in electromagnetic environments
as follows, and customers and users should ensure employment
in such an environment.
Processor full load 14/15.8W
Under Windows with
100% CPU utilization
/with 2D/3D graphic full load
System full load 49.92 W
Under Windows with
100% CPU utilization and
simultaneous access to
all I/O devices.
Recommended
power supply
80W
With consideration of voltage
de-rating under high environment
temperature.
CAUTION:
Electronic devices may interact due to the presence of electro-
magnetic radiation. A safe distance of at least one (1) meter is
recccomended between devices, especially for sensitive equip-
ment. Upon request, a table contining more detailed informa-
tion is available from your dealer.
Guidance and
manufacturer’s declaration
Electromagnetic emissions
Emissions Test Compliance
Electromagnetic
Environment–Guidance
RF emissions
CISPR 11
Group 1
The system uses RF energy only for
its internal function, such that RF
emissions are very low and unlikely to
cause interference with nearby
electronic equipment
Power Consumption