ADLINK iSeries Monitor 18/21 - Manual (Page 26)

14 Introduction
1.6 Rear Panel I/O Connectors
Figure 1-9: Rear Panel I/O
Table 1-5: TPZ-1300 Rear Panel I/O Connector Legend
1.6.1 DC Power Supply Connector
The DC power supply connector consists of three pins, V+, chas-
sis ground, and V- from right to left respectively. V+ and V- pins
are for DC power input and chassis ground pin grounds the chas-
sis for better EMC compatibility. DC power input of the TPZ-1300
allows a voltage input range from DC 6 to 36V, with UVP (under
voltage protect of 6V), OVP (over voltage protect of 36V), and
reversed polarity protection.
DC power input is rated at 24VDC, with supply from 6VDC to
36VDC wide-range DC power input
A DC power supply connector
B COM port connectors (DB9 x4)
C USB 2.0 connectors (Type A)
D Gigabit Ethernet connector
E Digital I/O connector
F Antenna connector (optional)
A B C
F
E