ADLINK iSeries Monitor 18/21 - Manual (Page 33)

Introduction 21
TPZ-1300
Table 1-9: LVDS Interface Connector Pin Definition
1.7.3 Clear CMOS Jumper
Upon encountering an abnormal condition preventing the
TPZ-1300 from booting, the jumper can clear the BIOS content
stored in CMOS and restore default settings. To clear CMOS,
short pin #2 to pin #3 of JP1 and then return to normal mode (short
pin #1 to pin #2).
Table 1-10: Clear CMOS Jumper
Pin Signal Pin Signal
1 +LVDS_VCC 2 +LVDS_VCC
3 GND 4 GND
5 LVDS_CLK+ 6 LVDS_TXP2
7 LVDS_CLK- 8 LVDS_TXN2
9 GND 10 GND
11 LVDS_TXP0 12 LVDS_TXP3
13 LVDS_TXN0 14 LVDS_TXN3
15 GND 16 GND
17 LVDS_TXP1 18 LVDS_DCLK
19 LVDS_TXN1 20 LVDS_DDAT
Normal Clear