AMT Datasouth Fastmark 400 - Manual (Page 36)

User's Guide 35
Command (Cont) Description Parameter
d0,euro Enable/disable
European dollar
mark
**
0: disable European dollar mark.
1: enable
d1,hadj Set horizontal
position adjustment
**
hadj: adjustment in dots.
d2,hadj Same as d1 except the parameter is not saved to non-
volatile memory.
Notes:
1. x and y represents horizontal and vertical co-ordinate values.
2. hm and vm stand for horizontal and vertical multipliers.
3. rot is the rotation direction, its value is from 0 to 3.
4. nr is either N for normal printing or R for reverse printing.
5. string is bracket by double quote marks, e.g. “text”.
6. ** Commands will cause the printer to save the parameters to non-volatile memory.
7. ZS takes effect only if flash memory board is installed.