AMT Datasouth Journey II - Manual (Page 45)

35
6. Place the stock in BIN 1 in the orientation shown on the BIN 1 instruction
label. Gently square the coupon stack against the inside wall of the input
bin.
7. Insert the staple tab (with the side to be printed facing up) into the BIN 1
INPUT SLOT (located at the top left corner of the input bin) until it is snug
against the input rollers.
8. Turn the green STOCK LOAD KNOB A one-quarter (1/4) turn
counter-clockwise to fully engage the staple tab in the load rollers.
Figure 3-3. Loading Coupons — BIN 1
INSERT
COUPON
TURN KNOB
A — ¼ TURN
COUNTER-
CLOCKWISE