AMT Datasouth Journey II - Manual (Page 46)

36
9. Close the BIN 1 ACCESS DOOR fully, lock the cover, and remove the key.
10. If the printer is powered off, power on the printer. If the printer is already
powered on, press the RESET/CLEAN key to recover from a stock empty
error message.
Failure to fully close and lock the BIN 1 ACCESS DOOR may result
in the printer reporting a cover open condition. Move the key to
the unlock position, press the cover firmly to fully close the cover,
then lock.
RESET KEY
Figure 3-4. Loading Coupons