Austin Hughes Fan Unit & ICM-02 - Manual (Page 43)

www.austin-hughes.com UM-ICM-02-Q215V1 P.38
Part V. Software Usage & Operation
In < Temp setting >,
- “ Activate ” or “ Deactivate ” Temp sensor
- Change “ Location ”, “Alarm Setting ” & “ R. alert setting “ of Temp sensor
- “ Enable “ or “ Disable “ auto CFM control
- Click “ Apply ” to fi nish the above settings
The default Temp setting is Deactivate .
- When install Temp sensor, please tick Activate . Otherwise, no readings display.
- DON’T activate Temp sensor if no sensor installed.