Avalue EEV-EX03 - Manual (Page 34)

EEV-EX03
34 EEV-EX03 Quick Installation Guide
LCDDO15 - Even Txout2
LCDDO16 - Even Txclk#
LCDDO17 - Even Txclk
LCDDO18 - Even Txout3#
LCDDO19 - Even Txout3
BIASON Controls panel contrast voltage.
DIGON Controls panel digital power.
ENBKL# Controls backlight power enable.
I
2
C_DAT, I
2
C_CLK
I
2
C interface for panel parameter EEPROM. This EERPOM is mounted on the
LVDS receiver. The data in the EEPROM allows the EXT module to automatically
set the proper timing parameters for a specific LCD panel.
2.3.31.2 IrDA (SIR) Signals
Signal Signal Description
IRTX, IRRX Infrared transmit and receive pins.
2.3.31.3 Parallel Port Signals
Signal Signal Description
STB# This active-low signal is used to strobe the printer data into the printer.
AFD#
This active-low output tells the printer to automatically feed the next single line
after each preceding line has been printed.
PD[0:7]
This bi-directional parallel data bus is used to transfer information between the
CPU and the peripherals.
ERR# This active-low signal indicates an error situation has occurred at the printer.
INIT# This active-low signal is used to initiate the printer when low.
SLIN# This active-low signal selects the printer.
ACK#
This active-low output from the printer indicates that it has received the previous
data and that it is ready to receive new data.
2.3.31.4 PS/2 Keyboard and Mouse Signals
Signal Signal Description
KBDAT Bi-directional keyboard data signal.
KBCLK Keyboard clock signal.
MSDAT Bi-directional mouse data signal.
MSCLK Mouse clock signal.