Bonaire B Series Light Commercial - Manual (Page 21)

I NSTALLATION , O PERATION & M AINTENANCE
Warranty – Australia Only
WARRANTY – AUSTRALIA ONLY
IMPORTANT:
Please read this warranty information and complete the Dealer/Product information on the following
page. KEEP this with your original purchase documents for any claim under warranty.
WARRANTY PROCEDURES:
Firstly refer to your owners manual to ensure you have followed the correct operating procedures of your
product, and refer to the trouble shooting guide to assist solving any problems you may have.
1. Read this warranty statement carefully before you request warranty service as items relation to
installation are not covered by this appliance warranty.
2. A proof of product purchase must be provided for warranty service, to validate the appliance is within the
manufacturer’s warranty periods.
3. This warranty is only for products and associated original controls for Climate Technologies
manufactured product.
4. Only an authorised Climate Technologies service provider must carry out warranty service.
5. Statutory warranty is 12 months from date of purchase and all additional periods are classified as
manufacturer’s voluntary warranty.
Climate Technologies provides the following Manufacturers warranty on new product additional to
all implied warranties and other statutory rights which you may have under the Trade Practices Act
and similar State & Territory Laws, subject to the following terms and conditions.
TERMS AND CONDITIONS:
Conditions to warranty
• Subject to the exclusions noted, Climate Technologies warrant the product for the period as prescribed
in the table following this statement to be free from Inherent defects in materials and workmanship for
functional and structural components.
• This product is only valid if the product is operated in accordance with the manufacturers instructions
• The appliance must not be modified or changed in any way.
• Your proof of purchase MUST be produced before free service will be provided.
• Travelling time and mileage are included within 30km of either your authorised Climate Technologies
dealer or service provider’s premises. Customers in areas other than the above are responsible for any
travelling time and mileage required to carry out warranty repairs.
• The product must be installed by a qualified person in the manner prescribed by local & statutory
regulations and to the manufacturer’s specifications.
• Service within the terms of this warranty will be recognised where we are satisfied that the appliance or
part was supplied within the relevant time limits. Documents of purchase and Dealer/Installer
information will assist in this process.
• Product fitness for purpose and overall system design / sizing is solely the responsibility of the dealer /
installer. This includes but is not limited to heat load calculations, air flow, system balancing, humidity,
water quality etc.
• The product must be installed in an easily and safe accessible area for service, appliances installed in
areas not easily and safely assessable, costs will be borne by the owner for access equipment should
maintenance be required.
Page 21